Follow by Email

Monday, June 16, 2008

Don't Laugh!

I bought this "thing" from a sewing catalog - it's a piece of interfacing that you are supposed to iron onto a long strip of material (or one that you pieced together from scraps). The interfacing is marked out in sections so that all you do is iron it on, attach straps and Velcro, fold according to the markings and sew around the edges. When you turn it right side out it magically becomes a little pouch for your cell phone with an extra pocket for change, your licence, etc. and a long strap.

So being me, I decided before I used up the interfacing I would trace it onto a paper pattern so I could continue to make pouches after the interfacing was gone. All I would have to do is use a piece of regular interfacing and transfer the markings to it. Easy? Simple? Don't bet on it!

I decided to use two layers of lightweight material since I did not have any extra interfacing laying around (and I didn't feel like digging through piles of stashed scraps and fabrics to find some).

I decided to embroider a design on the material first and followed my homemade pattern for the placement of the embroidered design. Who knew the placement would be off just enough to throw my carefully placed design way off kilter?

I decided to use a button loop and button instead of Velcro. Who knew the placement would be off just enough to leave the loop off center and the button INSIDE the finished pouch!

Because I used two layers of material (I thought it would be the same as one layer of fabric and one layer of interfacing) the thing was so bulky that I couldn't turn it right side out without tearing out the side seam.

Once I had the thing turned right side out the button loop was off center, the button was inside the pocket, the flap was too loose to close anyway and for some reason, the shoulder strap wound up sewn INSIDE the finished pouch. Too bad, this had the potential of being a really cute little thingy. I had plans to make several for gifts.

Actually, like most things, I could see the cause of my errors as I went along and I think I can fix them all. I just have to get over the waste of the time and material and get in the mood to try again. This time I will definitely use interfacing and will probably even use the preprinted piece that came with the kit. Then if that works I'll know it was just "beginner's luck" that caused my first failure.

Anyway, you probably will NOT be getting a personalized cell phone pouch for your birthday. But keep your eyes open - - - maybe around Christmas? Who knows?

Quotable Quotes; in the category Not AGAIN, I just FIXED that!

As ye sew, so shall ye rip. ~Author Unknown

1 comment:

Fortuna said...

So you take the little pouch and give it to mom or dad for Christmas and tell them it's an ashtray. That's what I always did with anything I made that didn't turn out.

Serves 'em right for smoking.